Checklist When Data Is Missing In The Display - ADE WS 1704 Mode D'emploi

From now on, the weather station automatically switches
to receiving-mode multiple times each night. During
this process, the displayed time is compared with that
received from the time signal transmitter and, if necessary,
corrected.
If no sufficiently strong signal has been received,
the base station aborts the receiving process after a
few minutes and the radio-tower symbol goes out. The
receiving process is started again at a later point in time.
In this case, the time proceeds as usual (beginning with
the start time of "00:00").
Data from the wireless outdoor sensor are
transmitted continuously several times per
minute.

Checklist when data is missing in the display

No data display from the time signal transmitter
1. Check whether the location of the base station is
suitable, see "Choosing a location".
2. Restart reception manually, see "Manually starting
signal reception".
3. Wait until the base station automatically switches
back to reception at a later time. The reception is
usually better at night.
4. Manually perform the settings if reception is not
possible at your location, see "Setting the time and
date manually".
64
Weather Station with Wireless Outdoor Sensor WS 1704