Switches The Alarm Function On/Off; Waking Up - ADE WS 2132 Mode D'emploi

8. Use the + or - button to set the desired time span
for the snooze function (time span between two
alarms). If you select "OFF", the snooze function is
switched off.
9. Proceed as described to make the same settings
for "AL2". If you do not need a second alarm time,
press ALARM repeatedly until the normal display is
shown again or press SNOOZE/LIGHT once.
Briefly press ALARM repeatedly to display the
set alarm times one after the other.

Switches the alarm function on/off

‚ Repeatedly press + briefly to activate the
respective alarm function. Observe the display.
The display will accordingly show "M-F" or "S-S" or
"M-F" and "S-S" as well as
‚ To deactivate an alarm function, also press +
repeatedly until the corresponding alarm symbol
is no longer displayed.

Waking up

At the set time, you will be woken by an alarm signal,
which will become more intense as the waking time
increases.
Weather station with ventilation recommendation WS 2132
.
69