Starting Signal Reception Manually; Choosing A Location - ADE WS 2132 Mode D'emploi

Starting signal reception manually

If the radio signal symbol to the left is no
longer displayed, the radio signals from the
time signal transmitter are no longer being
received. The time indicator nevertheless
continues precisely.
− Keep the + button pressed until the radio signal
symbol is displayed again. The signal reception is
thus started manually.
‚ If the reception was not successful, the reception
symbol disappears after a few minutes and the
time on the display continues to run normally.
‚ Upon successful signal reception, the base
station adjusts itself to the time of the time signal
transmitter. If you have already made manual
time and date settings, they will be adjusted
automatically.

Choosing a location

NOTE on material damage
‚ Protect the base station from dust,
‚ Only set up the base station in a dry,
Weather station with ventilation recommendation WS 2132
56
shocks, extreme temperatures,
moisture and direct sunlight.
closed room.