Displaying Stored Temperatures - ADE WS 2132 Mode D'emploi

Displaying stored temperatures

Press the MEM button repeatedly to display the
following values for the last 24 hours:
− highest indoor and outdoor temperature with
display of the corresponding air humidity
− lowest indoor and outdoor temperature with
display of the corresponding air humidity
− current indoor and outdoor temperature with
display of the corresponding air humidity
If "LL.L" or "HH.H" appears on the display, the
temperature is below or above the display
range.
Displaying values of other outdoor sensors
Only if you have connected more than one outdoor
sensor to the wireless weather station:
− Press the - button during the display.
Deleting stored MAX/MIN values
− Press and hold the MEM button for approx.
2 seconds during the display until the displayed
MAX and MIN values are deleted.
Weather station with ventilation recommendation WS 2132 67