Publicité
Les langues disponibles
Les langues disponibles
48A Charging Station Series 2
5.4.1. Operation for Charger as Shipped
1.
Release charging connector from holster.
2.
Insert the charging connector into the EV.
3.
Charging session started.
Figure 5.1 Connect the Charging Connector to the EV
or
5.4.2. If RFID Access Control is enabled on your charger, then you
will authorize charge session by RFID Card (Authorize first and
then plug)
1.
Swipe card.
2.
Wait until the screen changes to "authorizing".
3.
Insert the charging connector into the EV. If charging connector is not
connected to the EV within 60 seconds the RFID authorization will expire.
User will need to swipe card again.
4.
Charging session started.
5.5. Stop Charging
1.
Unplug any time (disconnect the charging connector from EV to stop char-
ging session).
2.
Session ended (return the connector to the holster).
34
Installation Manual
Public
Publicité
