Publicité
Les langues disponibles
Les langues disponibles
Installation Manual
Step 3.
Remove the mounting bracket by sliding the bracket down and off the
charger.
Step 4.
Secure the main body mounting bracket to the wall with appropriate
screws.
Follow applicable accessibility requirements for the mounting position. The unit
shall be stored or located at a sufficient height. For indoor sites, it should be
installed between 18 inches (450mm) and 4 feet (1.2m) above ground. For outdoor
sites, it should be installed between 24 inches (600mm) and 4 feet (1.2m) above
ground. Refer to Article 625, NEC.
The mounting bracket has ten screw holes for different dimensions of mounting
surfaces. If only two screws are used to fasten the mounting bracket, the screws
should pass through the middle two screw holes of the mounting bracket.
Public
Figure 4.5 Remove the Mounting Bracket
Figure 4.6 Fasten Mounting Bracket
48A Charging Station Series 2
23
Publicité
