Publicité
Les langues disponibles
Les langues disponibles
48A Charging Station Series 2
Screw sizing suggestion:
•
For masonry walls, use M6 mechanical screws. (Commercially Available)
•
For finished walls supported by wood studs, use #12 tapping screws.
•
Refer to the following screw torque guide. The actual torque is according to the wall
material.
Screw
Length
M6
#12
25.4mm
Step 5.
Fasten Charger onto Mounting Bracket.
1.
Put the charger on the mounting bracket.
Figure 4.7 Secure Charger to Mounting Bracket
14mm
31 kgf.cm min
25 kgf.cm min
Torque
24
Installation Manual
27 lbf-in min
22 lbf-in min
Public
Publicité
