Publicité
Les langues disponibles
Les langues disponibles
48A Charging Station Series 2
4.3. Installation Completion
Step 14.
Install front cover then fasten M4 screw.
Screw
M4
Step 15.
Stick the product label over the main label to cover up the original In/
Out information.
Figure 4.16 Amperage Reduction Label on Charger Side
Step 16.
Stick the Amperage label on the breaker (optional).
Figure 4.15 Loosen 1 pc M4 Screw
Length
12mm
In/Out (Dans/Dehors):
208-240VAC, 1Ø, 50/60Hz, Max.48A
Type: Type 4 Enclosure
Torque
8 kgf.cm
CHARGING STATION
Taper: Type 4 Enclos
32
Installation Manual
6.9 lbf·in
Public
Publicité
