Publicité
APPROVALS
De-icing and Snow Melting Equipment
|
2
nVent.com/RAYCHEM
DESCRIPTION
The nVent RAYCHEM EMK-XEJ Expansion Joint Kit is for use with
ElectroMelt EM2-XR heating cable and is used to form an expansion
loop at expansion joints. Materials for one expansion joint are
included.
These installation instructions should be used in conjunction with
the ElectroMelt System Design Guide (H53393) and ElectroMelt
System Installation and Operation Manual (H58086).
For technical support call nVent at (800) 545-6258.
KIT CONTENTS
Item
Qty
Description
A
2
Heat-shrinkable tube – 1 1/2 x 6 in (38 x 152 mm)
B
1
Expansion tube – 1 x 24 in (25 x 610 mm)
TOOLS REQUIRED
•
Heat gun or propane torch
•
Wire strippers
ADDITIONAL MATERIALS REQUIRED
•
EMK-XJB (Not shown) or equivalent UL Listed or CSA Certified
weatherproof junction box suitable for the location. A minimum
of 400 cubic inches are needed for 1 power connection and 1 end
termination per junction box.
A
B
Publicité
