Milwaukee MXF PSC Notice Originale page 13

ASSEMBLY
Upon removing the machine from its box for the fi rst time, you will
fi nd the machine with the main handle folded to reduce the shipping
size.
The device is delivered without blade. The correct blade for the
application must be purchased separately. Contact your local
Milwaukee dealer or visit the Milwaukee website at https://www.
milwaukeetool.eu.
Selecting the proper blade length
Cat. No. Blade Length Weight
MXF PSB-1.22m 1,22 m 3,6 kg
MXF PSB-1.83m 1,83 m 5,5 kg
MXF PSB-2.44m 2,44 m 7,3 kg
MXF PSB-3.00m 3,00 m 9,1 kg
MXF PSB-3.65m 3,65 m 10,9 kg
MXF PSB-4.25m 4,25 m 12,8 kg
MXF PSB-4.87m 4,87 m 14,6 kg
CLEANING
Do not allow concrete to harden on the machine. Wipe all concrete
off the frame and any other parts of the machine.
Remove the battery before cleaning the tool.
Allow the engine to cool before cleaning. When the engine has
cooled, remove all concrete and foreign debris using a soft brush,
wiping cloth and a mild cleaning detergent. Do not use a high
pressure water jet.
Avoid getting water inside the motor, batterie compartment,
electronics housing or into the on/off switch on the handle.
If you are not going to use the machine for a long period of time,
allow it to dry thoroughly and store it in a clean, dry and dust-free
place.
TRANSPORT
Always shutdown motor before transporting.
Never carry the machine while the motor is running.
Always tie-down the product during transportation by securing the
product with rope.
Never attach a forklift or other lifting device to the lifting bar. This bar
is only for manual lifting on the jobsite.
24
MAINTENANCE
Visual inspection of all parts for damage.
Battery - visual check for damage.
Battery charger - visual check for
damage.
Check that the connections are tight:
blade - machine: tighten if necessary.
Clean the machine and blade
Clean the battery.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the machine type printed as well as the six-digit No. on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
ENGLISH
SYMBOLS
Please read the instructions carefully before starting
daily after
the machine.
before operation
x
CAUTION! WARNING! DANGER!
x
x
Remove the battery pack before starting any work on
the machine.
x
Do not swallow the coin cell battery!
x
x
Always wear goggles when using the machine.
Wear ear protectors!
Wear a suitable dust protection mask.
Wear gloves!
Wear head protection.
Wear safety shoes.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
n Vibrations per minutes
V
Voltage
Direct Current
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH 25