Télécharger Imprimer la page

Parkside 446624 2307 Mode D'emploi D'origine page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
WARNING!
Danger of fingers
being crushed!
The product moves
during use. Only make
adjustments to the pro-
duct when the water tap
is closed.
• WARNING! Never point the
water jet at people or animals!
• WARNING! Never point the
water jet at electrical equip-
ment!
• The product must always be
placed in a steady and firm
position on level ground.
• Only suitable for outdoor use.
Avoid material
damage!
• Protect the product from frost.
• The product is only suitable for
use with cold water.
• WARNING! Turn off the tap
after each use.
• Do not grease or oil the spray
nozzles as they may clog.
• Do not turn the rotor manually,
otherwise the mechanism may
get damaged.
• Check the product for damage
or wear before each use. Only
use the product if it is in good
working condition!
• Discontinue using the product
if there is visible or suspected
damage.
Use (Fig. A)
1. Connect the water hose (not
included) to the water tap.
2. Connect the other end of the
water hose to the connector
(1a) on the product (1).
Note: The hose connection must
audibly click into place.
3. Place the product on a flat and
level surface.
4. Turn the spray nozzles (1b) to
„MIN" to water the smallest
possible area or to „MAX" to
water the largest possible area.
5. Turn on the water tap.
Storage and cleaning
Store the product in a clean, dry
place at room temperature when
it is not in use.
Clean with a damp cloth and
then wipe dry.
IMPORTANT! Never use harsh
cleaning agents.
GB/IE
15

Publicité

loading