Avaya Octel 200 Manuel D'installation page 342

10-8 Volume Mise en réseau
Commande de modification
Utilisez la commande MODIFY pour modifier une entrée dans la table ROUTE.
.M ROUTE
Enter existing ROUTE name.
:
Enter the name for each NETWORK ROUTE, whether the route can be dropped upon
reconnect to caller, and the ACCESS DIGITS to be dialed.
ENTER AS:
ROUTE NAME (1-6 chars), DROP (Y or N), ACCESSDIG (1-29 digits)
ACCESS DIGITS may include: 0-9,*,# or any of the following:
Enter new ROUTE information.
MOD:
Commande d'effacement
Effacez d'abord l'entrée dans la table NUMBERING PLAN, puis dans la table LOCATION et enfin
dans la table ROUTE.
.D ROUTE
Enter ROUTE NAME to be deleted.
DEL:
ROUTE successfully deleted
Octel 200/300 S 4.1
D - delay.
E - wait for DIAL TONE here.
N - wait for DIAL-UP OCC DIAL TONE here.
P - dial PUBLIC NETWORK NUMBER here
T - dial TIE NETWORK NUMBER here.
.M ROUTE
.D ROUTE
PB60019-21 Rev B