Modification D'un Noeud Réseau Doté Uniquement De La Fonction Réseau Numérique - Avaya Octel 200 Manuel D'installation

11-30 Volume Mise en réseau
.M LOC
Enter existing LOCATION NAME.
MOD:CHGO1
Enter new LOCATION NAME. (1-6 chars) (Empty line = CHGO1 )
MOD:
Does CHGO1
MOD:
Enter the network PROTOCOL to use with with CHGO1
MOD:
Is CHGO1
MOD:Y
Enter the ROUTE NAME to access CHGO1
MOD:
Enter the EXTENSION NUMBER that internal callers dial
to access CHGO1
(1-8 digits, N=NONE, empty line = 4222)
MOD:4223
Enter the TELEPHONE NUMBER that external callers dial
to access CHGO1
(1-10 digits, N=NONE, empty line = 5256667777)
MOD:5256667778
Is CHGO1
MOD:
Should NAMESEND be enabled to CHGO1? (Y/N, empty line = N)
MOD:y
CHGO1 saved.
Enter existing LOCATION NAME. (1-6 chars) Enter empty line when done.
Modification d'un noeud réseau doté uniquement de
la fonction réseau numérique
Si l'une des fonctions réseau numérique est autorisée, une commande optionnelle, MODIFY
LOCATION DIGITAL, est disponible pour la modification des informations sur la fonction
réseau numérique d'un noeud réseau utilisant le protocole 3. Cette option de commande pose
uniquement des questions sur la fonction réseau numérique.
.M LOC D
Enter existing LOCATION NAME.
MOD:CHGO1
Enter new LOCATION NAME. (1-6 chars)(Empty line = CHGO1
MOD:
Enter the DIGITAL LOCATION NAME for CHGO1
(Empty line = CHICAGO1.OCTNET.COM )
MOD:
Enter the IP ADDRESS for CHGO1
(Empty line = 155.25.1.157
MOD:155.25.1.25
Is there a HIGH SPEED DIGITAL LINK to CHGO1
AT ALL TIMES ? (Y/N, empty line = Y)
MOD:
Is CHGO1
MOD:
Should NAMESEND be enabled to CHGO1? (Y/N, empty line = N)
MOD:y
CHGO1
Enter existing LOCATION NAME.
Octel 200/300 S 4.1
have a SYSTEM? (Y/N, empty line = Y)
located on the same PBX as this system? (Y/N, empty line = N)
directly
directly
accessible over the DIGITAL NETWORK? (Y/N, empty line = N)
part of the UNIFORM NUMBERING PLAN DOMAIN? (Y/N, empty line=Y)
saved.
? (1-3, empty line = 3)
. (1-6 chars, empty line = TO2)
on the DIGITAL NETWORK.
on the DIGITAL NETWORK.
)
that will be kept CONNECTED
(1-6 chars) Enter empty line when done.
.M LOC D
)
PB60019-21 Rev B