Technical Specifications - Hudora 10450/00 Instructions De Montage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.
Read the instructions carefully before use and keep them safe. It is essential to
follow the instructions to ensure your child's safety.

TECHNICAL SPECIFICATIONS

Item:
Item number:
Item weight:
Dimensions when assembled:
Folded size:
Maximum transport weight:
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/service/.
CONTENTS
1 x Handcart (folded)
1 x These instructions
Other items included are meant to facilitate safe transportation and are not requi-
red for the installation and use of the product.
ASSEMBLY INSTRUCTIONS
The Flexible handcart is delivered to you in transport condition (folded). (fig. 1)
Remove the handcart from the box and place it on its wheels.
Open the hook and loop fasteners on the sides.
Unfold the handcart by pushing the short sides of the cart away from each
other and pressing the loading surface slightly downwards until it lies flat
and audibly clicks into place.
Put the handcart on its side.
There is a round bar in the middle of the bottom. Fasten the loading surface
to the bar using the two hook and loop fasteners. (fig. 2)
Set the handcart upright again.
Now loosen the hook and loop fastener which fixes the pull bar. The length
of the pull bar can be adjusted. Loosen the quick release fastener and pull
the bar out to the desired length. Then close the quick release fastener
again. (fig. 3)
USE AND FOLDING INSTRUCTIONS
One of the long sides of the Flexible handcart can be opened to turn the
loading area into a comfortable seat. To do this, first open the upper hook
and loop fasteners and then the zips (fig. 4). Please note that the cart has a
maximum load capacity of 65 kg!
Close the side panel before each journey to prevent objects or people from
falling out.
At the back of the handcart there are several multifunctional flaps to which
you can attach personal items (e.g. small bags, water bottles etc.) if neces-
sary. Make sure that the rear wall is not overloaded.
Place the Flexible handcart on a flat surface before folding it up.
To fold up the handcart, pull the loop on the loading surface vertically up-
wards with a short jerk. The short sides of the cart can now be pushed to-
All images are examples of the design.
HUDORA Handcart "Flexible"
10450/00
ca. 9 kg
about. 90 x 58 x 75 cm
about. 78 x 55 x 24 cm
65 kg
gether. Close the hook and loop fasteners on the sides to secure the hand-
cart against unintentional folding.
Open the quick release on the pull bar and push the bar together. Close the
quick release fastener again and fix the pull bar to the handcart with the
hook and loop fastener.
LOCKING FUNCTION
The front wheels are each equipped with a locking function. To lock, press the
lower part of the black lever (marked "LOCK") down with your foot until it locks.
To release the lock, press the upper part of the lever (marked "UNLOCK").
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.hu-
dora.de/service/). Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone.
Make sure that the product is not wet or damp before you store it away. Otherwi-
se, there is a possibility of fungus growth. In the event of use in wet and on spe-
cific surfaces (sand, forest soil, grass, etc.) the wheel bearings are exposed to
increased wear. They should subsequently be serviced.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous in-
formation on the product, replacement parts, solutions to problems and lost as-
sembly manuals at http://www.hudora.de/service.
6/12

Publicité

Table des Matières
loading

Table des Matières