Publicité
Les langues disponibles
Les langues disponibles
en Childproof lock
Cancelling the timer
Childproof lock
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
11.1 Activating the childproof lock
Requirement: The appliance is switched off.
Press and hold
▶
a The control panel is locked.
a The
symbol appears in the display.
Basic settings
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Indicator
1
Factory setting (may vary according to model)
12.2 Changing the basic settings
Requirement: The appliance must be switched off.
Press and hold
for a few seconds.
1.
a The first basic setting is shown on the display.
Use the settings area to change the basic setting.
2.
Press
.
3.
a The next basic setting is shown on the display.
4.
Use
to select all of the required basic settings
and change the values.
56
for approx. 4 seconds.
Basic setting
Signal duration
Button tone
Display brightness
Time indicator
Interior lighting
Factory setting
Signal volume
Use the settings area to set the timer duration to
▶
.
a The timer is switched off.
a If a timer duration has been set, this continues to
count down. While the childproof lock is active, the
timer duration cannot be changed. Signal tones,
e.g. when the timer duration has elapsed, can be
ended by pressing any button
11.2 Deactivating the childproof lock
Press and hold
▶
a The control panel is unlocked.
Selection
= short = 10 seconds
= medium = 30 seconds
= long = 2 minutes
= off
1
= on
= low
1
= medium
= high
= off
1
= on
= off
1
= on
1
= off
= on
= low
1
= medium
= high
To save the changes, press and hold
5.
seconds.
Note: The changes to the basic settings will be re-
tained even after a power cut.
12.3 Discarding changes to the basic
settings
Press
.
▶
a All changes are discarded and not saved.
for approx. 4 seconds.
Description
Set the signal duration for
1
after a cooking time
elapses or the timer
reaches zero.
Switch the button tones on
or off.
Set the brightness of the
display.
Show the clock time in the
display.
Switch the interior lighting
on or off.
Reset the changed settings
to the factory settings.
Setting the signal volume.
for a few
:
Publicité
