Publicité
Les langues disponibles
Les langues disponibles
en Basic operation
Basic operation
7 Basic operation
7.1 Switching on the appliance
Press
to switch on the appliance.
▶
a The appliance is ready to use.
a A default value appears in the display.
7.2 Switching off the appliance
Switch your appliance off when you are not using it. If
no settings are applied for an extended period, the ap-
pliance switches itself off automatically.
Press
to switch off the appliance.
▶
a The appliance stops any ongoing functions.
a The display shows the time.
a Some displays also remain visible in the display
when the appliance has been switched off.
7.3 Setting the type of heating and
temperature
Use the function selector to set the required type of
1.
heating.
a A default value appears in the display.
If necessary, change the settings. To do this, touch
2.
the appropriate field and use the rotary selector to
change the value.
Press
.
3.
a The appliance starts.
lights up.
a
a With a type of heating with temperature, the temper-
ature display lights up gradually.
If necessary, use the rotary selector to change the
4.
temperature while the oven is in operation.
When the appliance is in operation, you cannot set
the temperature to 40 °C.
7.4 Pausing operation
You can pause operation at any time.
Press
or open the appliance door.
1.
a Operation is paused.
flashes.
a
2.
To continue operation, close the appliance door and
press
.
a Operation continues.
lights up.
a
7.5 Stopping operation
You can stop operation at any time.
Press
.
▶
Microwave
8 Microwave
You can use the microwave to cook, heat up, bake or
defrost food very quickly. The microwave can be used
on its own or in combination with a type of heating.
50
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
7.6 Rapid heating
To save time, you can shorten the preheat time for cer-
tain types of heating from a minimum temperature of
100 °C.
You can use rapid heating for the following types of
heating:
Hot air, exception: Hot air 40 °C
¡
Hot air grilling
¡
Configuring rapid heating
To ensure an even cooking result, do not place the ac-
cessory with the food in the cooking compartment until
rapid heating has finished. Do not set a cooking time
until rapid heating has finished.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Press
.
2.
lights up in the display.
a
Press
.
3.
a Rapid heating starts.
lights up.
a
a Once the set temperature has been reached, the
rapid heating process ends. A signal sounds and
goes out in the display. Your appliance continues to
run with the set type of heating and temperature.
a Rapid heating is automatically deactivated within no
more than 15 minutes.
Cancelling rapid heating
Press
.
▶
goes out in the display. Your appliance continues
a
to run with the set type of heating and temperature.
7.7 Safety switch-off function
For your safety, the appliance has a safety switch-off
function. The appliance is automatically switched off if it
has been in operation for an extended period.
How long the appliance waits before switching itself off
depends on the setting:
¡ Hot air 40 °C and preheating: 24 hours
¡ Hot air 100-230°C and hot air grilling: 5 hours
¡ Grill: 90 minutes
If the appliance has been switched off by the safety
switch-off function,
is shown in the display. You can
confirm this message by pressing
When the appliance is in microwave-only mode, you
can place the cookware on the cooking compartment
floor or on the wire rack.
.
Publicité
