Miller Spoolmate 3545 Manuel D'utilisation page 13

3-1. Specifications For Spoolmate 3035
Approximate
Wire Diameter Range Wire Feed
.023 Thru .035 in
(0.8 Thru 0.9 mm)
Aluminum Wire 115 To 715 ipm
(4.1 To 20.4
.023 Thru 035 in
(0.8 Thru 0.9 mm)
Hard Or Cored Wire
3-2. Specifications For Spoolmate 3545
Approximate
Wire Feed
Wire Diameter Range
.030 Thru .047 in
(0.8 Thru 1.2 mm)
Aluminum Wire 200 To 1200 ipm
(5.1 To 30.5
.030 Thru 047 in
(0.8 Thru 1.2 mm)
Hard Or Cored Wire
NOTE
SECTION 3 − INSTALLATION
Cooling Maximum Spool
Method
Range
Air Cooled
mpm)
Cooling Maximum Spool
Method
Range
Air Cooled
mpm)
Spoolmate spool guns will connect directly to the Millermatic 210 and Millermatic
Pulser.
Installing a spool gun on the Millermatic 185 or Ironman 210, or Ironman 250
requires ordering and installing field kit 207 642 consisting of a toggle switch
assembly and gas diverter valve.
Installing a spool gun on the Ironman 250 (Eff w/Serial No. LA135884) requires
ordering and installing field kit 207 642 consisting of a toggle switch assembly and
gas diverter valve. The Ironman 250 prior to Serial No. LA135884 requires the
SGA 100.
Installing a spool gun on the Millermatic 185 previous to serial no. KH376829
requires ordering and installing retrofit kit 186 871 and field kit 207 642.
The SGA 100 or 100C spool gun adapter is needed for installation on other MIG or
engine driven welding power sources.
Weld Circuit
Size Rating
100 Volts, 150
Amperes, 60%
4 in (102 mm)
Duty Cycle
Diameter
Using Argon
Shielding Gas
Weld Circuit
Size Rating
100 Volts, 200
Amperes, 60%
4 in (102 mm)
Duty Cycle
Diameter
Using Argon
Shielding Gas
Overall
Weight
Dimensions
Length:
11-1/2 in (291 mm)
Width:
9.1 lb (4.1 kg)
2-1/4 in (57 mm)
Gun With Cable
Height:
8 in (203 mm)
Overall
Weight
Dimensions
Length:
11-1/2 in (291 mm)
Width:
9.1 lb (4.1 kg)
2-1/4 in (57 mm)
Gun With Cable
Height:
8 in (203 mm)
OM-1216 Page 9