Publicité
Les langues disponibles
Les langues disponibles
Error message
Extra dry
and
ECO operating
lights flash
The intensive pro-
gram
oper-
ating light flashes
quickly
Extra dry
, in-
tensive program
and quick
program
op-
erating lights flash
The intensive pro-
gram
, quick
program
and
ECO operating
lights are lit up
permanently
44 - English
Problem
Wash temperature is not
reached
The appliance over-
flows/leaks.
Error display on control
panel
Insufficient water sup-
plied to the water tank
within 3 minutes.
Salt container (1 1) is
empty
Solution
Heating element/thermistor error,
contact the service department.
Make sure that the door is closed
correctly and that the water sup-
ply and drain are connected cor-
rectly.
Turn off the water supply.
If water is on the appliance base
due to overfilling, remove the wa-
ter before restarting the dishwash-
er.
Contact our Service Centre.
Fill up the water tank with more
water until a quick acoustic signal
sounds.
Then press the
start the appliance.
Replenish the salt container (1 1)
button (14) to
Publicité
