Publicité
Les langues disponibles
Les langues disponibles
Fault
The dishes are not dried.
17. Error messages
Potential error messages are indicated by flashing or illuminated operating lights. Errors
can be pinpointed and their causes determined.
If the error cannot be solved using the table, contact the service department.
Error message
Extra dry
op-
erating light flash-
es
The intensive pro-
gram
, ECO
and quick pro-
gram
oper-
ating lights are lit
up permanently
Unsatisfactory drying results
Possible cause
The dishes were not
arranged correctly.
The dishes were re-
moved too soon.
An incorrect program
was selected.
Problem
No water supply detect-
ed or water supply too
slow
Too little water filled,
No water supply detect-
ed in the first three min-
utes
Solution
Arrange the dishes correctly
(see section "10.7. Arranging
the dishes and cutlery" on page
25).
Wear gloves if necessary if
detergent residues remain on
the dishes to avoid skin irrita-
tion.
Do not remove the dishes im-
mediately after the program is
finished.
Open the door slightly so that
the steam can escape.
Remove the dishes while they
are still slightly warm.
The temperature is lower in
programs with a short runt-
ime. Select a program with
a longer runtime and higher
temperature.
Solution
Flow rate measurement, drain
valve or pump failure, contact the
service department.
Fill up the water tank until an
acoustic signal sounds.
Then press the
start the appliance.
button (14) to
English - 43
Publicité
