SilverCrest 378202 21 Mode D'emploi page 30

quick program). Press the
The program duration increases when the extra dry function is switched on.
The control light (20) for the selected program lights up (see also "1 1.6. LED
indicator for the wash program" on page 34).
 Press the
button (14) to start the program.
The control light (19) for the selected program flashes.
If you press the
interrupted. The appliance sounds an acoustic signal every minute.
 Press the
button (14) again to continue the program. The program continues after
approx. 10 seconds.
11.3. Changing the program
You can only change the program if the appliance has been operating for a short time. If
the appliance has already been running for a longer time, the detergent and water must
be replenished and the required program must be restarted.
 Press the
button (14) to interrupt the program.
 Press the P button (18) for approx. 3 seconds until the appliance switches to standby
mode.
 Then select another program: To do so, press the program selection button P several
times until the operating light(s) for the required program light(s) up.
 Press the
button (14) again to start the program.
The program starts after approx. 10 seconds.
30 - English
button (15).
button (14) while the program is running, the program is