Publicité
Les langues disponibles
Les langues disponibles
CHECK WATER SUPPLY
STEP 3
REQUIREMENTS AND
CAUTIONS
• The hot water supply line pressure must be between
0.04-1MPa.
• Adjust the water heater to deliver water between
120 °F (49 °C) ~ 149 °F (65 °C).
• The dishwasher must be connected to a hot water
supply between 120 °F (49 °C) ~ 149 °F (65 °C).
• This temperature range provides the best washing
results and shortest cycle time. Temperature should
not exceed 149 °F (65 °C) to prevent damage to
dishes.
• Ensure that the water supply valve is turned off
before connecting the hot water supply line to the
dishwasher.
• Seal the hot water supply line connections using
teflon tape or sealing compound to stop any water
leakage.
• When you install the dishwasher, ensure there is
nothing on the drain hose and be careful not to tear it
during the installation process.
Hot water
supply line
Installing the Dishwasher
Power cable
5
/
~ 7
/
in.
1
1
3
3
(135 ~ 185 mm)
7
Figure 2
Publicité
