Publicité
Les langues disponibles
Les langues disponibles
WIRING
STEP 11
CONNECTIONS
1. Before connecting the power cable to the dishwasher,
make sure the circuit breaker is off.
2. In the junction box located at the front bottom right of
the dishwasher, find the three power wires from the
dishwasher including the grounding line.
3. Pass the power cable through the strain relief, and
then into the junction box (Figure 11).
4. Connect the black wire of the dishwasher to the black
wire of the power cable by inserting both into a wire
nut and then rotating the wire connector as shown in
Figure 12.
Connect the white wire to the white wire and the
green to the green in the same manner.
5. Recheck each wire to ensure it is connected correctly
and securely. Each colored wire should be connected
to the corresponding wire of the same color. White
should be connected to white, black to black, and
green to green.
6. Replace the junction box cover on the dishwasher.
Power cable
Junction box
Installing the Dishwasher
Black to black
White to white
Green to green
(ground to ground)
Figure 11
Figure 12
WARNING
Electrical Shock Hazard
To avoid electrical shock, do not work on an
energized circuit. Doing so could result in serious
injury or death. Only qualified electricians should
perform electrical work. Do not attempt any work on
the dishwasher electric supply circuit until you are
certain the circuit is de-energized.
WARNING
Fire Hazard. To avoid a fire
hazard, make sure electrical work is properly
installed. Only qualified electricians should perform
electrical work.
Recheck each wire to ensure it is connected correctly
and securely.
Each colored wire should be connected to the
corresponding wire of the same color.
16
Publicité
