Publicité
Les langues disponibles
Les langues disponibles
COMPLETING THE
STEP 12
INSTALLATION (cont.)
7. Tension adjustment of the door spring.
The door springs are set at the factory to the proper
tension for the outer door. If the decoration door is
installed, you will have to adjust the door spring tension.
Rotate the adjusting screw to drive the adjustor to strain
or relax the steel cable, see figure 18.
Door spring tension is correct when the door remains
horizontal in the fully opened position, yet rises to a
close with the slight lift of a finger.
Installing the Dishwasher
19
Figure 18
Publicité
