INsTALLATIoN
Preparations
8.2
Accessories
Special aerator "SR"*
- SR 3: Part number 289591
for DEM 3 and DEM 4
- SR 5: Part number 270582
for DEM 6 and DEM 7
* For use in thread M22/M24.
Non-pressurised taps
- WEN Sensor tap for washbasins
- MAW Wall mounted tap for oversink installation
- MAZ Twin lever basin tap
- MAE Mono lever basin tap
Pressure-tested tap
- WEH Sensor tap for washbasins
ZTA 3/4 - central thermostatic valve
Thermostatic valve for central premixing, for example for operat-
ing an instantaneous water heater with a solar thermal system.
38
| DEM
9.
Preparations
f Flush the water line thoroughly.
f
Water installation
A safety valve is not required.
Taps
f Use suitable taps (see chapter "Appliance description /
f
Accessories").
Note
Fitting the special aerator supplied provides an optimum
water jet.
10. Installation
10.1 Installation site
Install the appliance in a room free from the risk of frost and near
the draw-off tap.
Ensure that the lateral fixing screws for the cover are always ac-
cessible.
The appliance is suitable for undersink installation (water con-
nections at the top) and oversink installation (water connections
at the bottom).
www.stiebel-eltron.com