Operation; On-Off-Switch; Speed Adjustment; Tool Rest - HOLZMANN MASCHINEN VD 1100ECO Mode D'emploi

15.2

Operation

15.2.1 On-Off-switch

Switch on: Push the green button ("I") for 2 seconds. The machine begins to run.
Switch off: Push the red button ("0").
The machine does not stop immediately! Stay as long at the machine, until the workpiece is
completely stopped (Do not stop the workpiece by hand!)

15.2.2 Speed adjustment

The speed can be set infinitely variable by turning the speed control lever.
You must move the lever
to the lowest speed setting before turning the switch
ON/OFF, otherwise the motor may not start!

15.2.3 Tool rest

 The tool rest should be selected as close as possible to the workpiece!
 Height adjustment just below the centerline of the workpiece.
 Rotate the workpiece by hand and check that the workpiece can rotate
freely before turning!
HOLZMANN MASCHINEN GmbH
NOTICE
www.holzmann-maschinen.at
NOTICE
OPERATION
27
VD 1100ECO