Sony NEX-FS700 Serie Mode D'emploi page 9

The following setting is added to
[GAMMA], and provides a gamma curve
for checking an image with the camcorder
when recording in RAW.
[ITU709 Equivalent to that of
(800%)] ITU709, suitable for
usual monitoring.
[S-LOG2] Gamma curve for S-
LOG2, suitable for
checking a captured
image over the whole
dynamic range.
About ISO setting values
The available [ISO SET] or [AUTO ISO
LIMIT] setting values when a picture
profile is set to [ITU709 (800%)] or
[S-LOG2] are as follows.
[ISO SET]
– ITU709(800%): ISO2000 - ISO64000
– S-LOG2: ISO2000 - ISO64000
[AUTO ISO LIMIT]
– ITU709(800%): ISO2000 - ISO51200
– S-LOG2: ISO2000 - ISO51200
b Notes
• When the picture profile is set to [ITU709
(800%)] or [S-LOG2], One Push White Balance
may not be possible if exposure is insufficient.
Set a brighter exposure and perform One Push
White Balance, then set the desired exposure.
• Picture profile settings cannot be applied to
RAW images.
• When [ITU709 (800%)] or [S-LOG2] is set, the
following picture profile items become
ineffective.
– [BLACK LEVEL]
– [COLOR MODE]
– [COLOR LEVEL]
– [COLOR PHASE]
On CAMERA PROFILE compatibility
Camera profile compatibility after
camcorder software version upgrade is as
follows.
• A camera profile saved by a camcorder with
software older than [Ver.3.0] can be loaded to a
camcorder upgraded to [Ver.3.0] or later.
• A camera profile saved by a camcorder with
software [Ver.3.0] or later cannot be loaded to a
camcorder with software older than [Ver.3.0].
• A camera profile saved by a camcorder with
software [Ver.3.0] or later can be loaded to a
camcorder upgraded to [Ver.3.0] or later.
GB
GB
5