Sony NEX-FS700 Serie Mode D'emploi page 6

English
New functions have been added to your camcorder by the firmware update. The new functions
and respective operations added to NEX-FS700 series camcorders with firmware the "Ver.
3.0" upgrade are described here.
Please refer to the Operating Guide of your camcorder.
RAW format recording
supported
Signals output from the SDI OUT jack of
this camcorder can be converted by the
HXR-IFR5 (sold separately), and recorded
as RAW images in the AXS-R5 (sold
separately).
• The software version of the AXS-R5 must be
Ver.1.20 or later. Update as necessary.
This camcorder
/ /
[ / /
of [ / SET] on the [REC SET]
screen of the REC/OUT SET menu, and
you can record RAW images.
(default setting)
When recording RAW images with the
AXS-R5, the following settings are
recommended.
– White Balance: 3200K, 4300K or 5500K
– Gain (or ISO): 0 dB (or minimum ISO
sensitivity)
GB
2
HXR-IFR5
BNC cable
AXS-R5
SET
SET] will appear in place
Output RAW images
from the SDI OUT jack.
Record HD movies with
the camcorder.
Record SD movies with
the camcorder.
Notes on recording RAW images
• You can trigger an external recorder to start/stop
recording by pressing the REC START/STOP
button on the camcorder body. However, the
status of the external recorder cannot be checked
on the LCD screen.
• Triggering an external recorder is always
enabled when recording in RAW. Trigger
instruction status is displayed on the LCD
screen of the camcorder. For details, see [SDI/
HDMI REC CONTROL].
• The recording date, time and color bars are not
recorded when recording in RAW.
• Flicker adjustment is set to off.
• When [
[
Battery
the same frame rate as the format selected in
pack
[
rate's maximum bit-rate.
• Images are recorded in 17:9 in RAW, but are
displayed on the LCD screen of the camcorder
in 16:9 (Edge Crop).
• When recording in RAW, SDI output settings
are not applied.
• RAW images recorded on an external recorder
will not play back on this camcorder. AVCHD
movies can play back. When using the HXR-
IFR5, connect the AXS-R5 to a monitor. Then
play back images or movies.
• Changing the gamma curve will change the
dynamic range of the image recorded (output),
depending on the type of gamma curve.
• Depending on the combination of gamma and
recording mode, noise may appear in an image.
[ OUTPUT FORMAT] is added on the
[REC SET] screen of the REC/OUT SET
menu, and you can select the output format
of RAW images.
60i
[4096×2160/24p]
[4096×2160/30p]
[4096×2160/60p]
[2048×1080/24p]
REC CONTROL] is set to
& ], AVCHD movies are recorded at
OUTPUT FORMAT], and at that frame
OUTPUT FORMAT
50i
–
[4096×2160/25p]
[4096×2160/50p]
–