Monacor TFT-2900LED Mode D'emploi page 13

4) If a menu item has been selected, change its
value with the button
adjusting option. If only an arrow is shown
behind a menu item, call a submenu or activate
the function of the menu item with the button .
5) To exit a menu page and to return to the selec-
tion of the menu pages, press the button EXIT
(1).
6) To deactivate the menu, press the button EXIT
(1).
The menu is also deactivated automatically
when the insertion time adjusted in the menu
(menu item Duration
elapsed after the last button has been pressed.
7.5.1 Page PICTURE
PICTURE
The page is shown in different versions,
depending on the video signal provided by the
respective source:
VERSION
Contrast
Brightness
Tint (for NTSC sources only)
Color saturation
Sharpness
Reduce or increase the value for the respective
picture parameter with the button
changing the value, the menu is deactivated and
only the scale is inserted at the bottom of the pic-
ture. After adjusting the value, press the button
EXIT to return to the menu.
colour presentation
Color Tone
Select Normal (standard adjustment for the
6500K
monitor), (warmer colour presentation) or
9300K (cooler colour presentation) with the but-
ton or .
(4) or (5) or select an
chapter 7.5.2) has
or . When
Scale picture format
Select Full (format 4 : 3) or
or .
Picture Mode
Standard Dynamic
Select ,
button or . For User
picture parameters can be adjusted. The values
are fixed for the other modes.
Standard Dynamic
Note: If ,
the adjustment is automatically changed to
soon as the value is changed for one of the picture
parameters ( Contrast
VERSION
If the source is digitally connected via the HDMI
input (8), the menu items
not be selected.
Contrast
Brightness
Contrast
see and
Color Tone colour presentation
Call the submenu for the menu item with the but-
ton :
16:9 with the button
Mild User
, or with the
, individual values for the
Mild
or has been adjusted,
... Sharpness ).
Auto Color Auto
and
Brightness
in version
GB
User as
TM
can-
13