Publicité
Les langues disponibles
Les langues disponibles
You can obtain further accessories from specialist retailers:
Accessories
Aluminium baking tray
Enamelled baking tray
Enamelled universal pan
Flat wire rack
Stepped wire rack with cut-out
System steamer
Before using the appliance for the first time
Set the clock and clean your appliance before first use.
Setting the clock
‹:‹‹ flashes in the clock display.
Press the clock function button.
1.
The KJ and 3 symbols light up. ‚ƒ:‹‹ appears in the clock
display.
Set the current time using the rotary selector.
2.
Your setting is accepted after 3 seconds.
Operating the appliance
In this section, you will find out how to switch your appliance on
and off, and how to select an operating mode and temperature.
Switching on the appliance
Turn the operating mode selector until the desired operating
1.
mode is selected.
Turn the temperature selector until the desired temperature is
2.
selected.
The r indicator lamp lights up while the appliance is heating
up and during any subsequent heating.
Accessories
CLOU 2x telescopic railings retrofit kit
Order no.
CLOU 3x telescopic railings retrofit kit
CZ 1332 X0
CLOU 4x telescopic railings retrofit kit
CZ 1342 X0
Protective device for oven door
CZ 1242 X0
CZ 1442 X0
The baking tray and universal pan may become distorted if
subjected to significant temperature differences (e.g. with
CZ 1432 X0
frozen foods in the hot cooking compartment).
CZ 1282 X0
Changing the clock
To subsequently change the time, press the clock function
button repeatedly until the KJ and 3 symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
Remove accessories and any remaining packaging from the
1.
cooking compartment.
Clean the accessories and cooking compartment with hot
2.
soapy water (see section: Cleaning and care).
Heat with % Top/bottom heat at 240°C for 30 minutes.
3.
Afterwards, wipe the cooled cooking compartment with hot,
4.
soapy water.
Clean the outside of the appliance with a soft, damp cloth
5.
and soapy water.
Switching off the appliance
Turn the operating mode selector back to the Û position.
1.
Turn the temperature selector back to the Ú position.
2.
After the appliance is switched off, the cooling fan may
continue to run.
Order no.
CZ 1702 X0
CZ 1742 X0
CZ 1752 X0
440651
47
Publicité
