Parkside HG10714 Instructions D'utilisation Et Consignes De Sécurité page 19

˜ Troubleshooting
The device contains sensitive electronic components.
That is why it experiences interference when in
close proximity to radio transmission devices. If any
indication errors appear in the display, remove such
devices out of the proximity of the caliper.
Electrostatic discharge could result in malfunctions.
When such malfunctions occur, remove the
battery for a short while and re-insert.
Failure
Five digits
flash
simultaneously
every second.
The LCD
display
5 ] [
does not
continue to
count.
16 GB/IE/NI
Cause
The battery
voltage is
lower than
2.6 V.
Faulty wiring
or circuit
Solution
Replace the
battery in line
with the chapter
"Insert / replace
battery".
Remove battery
and re-insert
after 30 seconds.