Publicité
Les langues disponibles
Les langues disponibles
˜ Before start of operation
˜ Insert / replace battery
(see Figure B)
Tip: Flashing numbers indicate a discharged / flat
battery (see Figure G).
Tip: When changing the battery, the LCD display
may experience faults. Remove the battery and insert
it again after waiting more than 30 seconds.
Loosen the screw
included).
Remove the lid from the battery compartment
(see Fig. B).
Remove the old battery.
Insert the new battery into the battery
compartment and ensure correct polarity
(+ and –). Make sure that the plus terminal
points outwards.
Close the lid to the battery compartment
(see Fig. B).
Tighten the screw
included).
˜ Preparing the caliper
Loosen the locking screw
move the caliper.
Clean all measuring surfaces
measuring blade
faulty measuring results may occur due to, for
example, humidity.
Check that all keys and the LCD display
correctly.
˜ Starting up the device
˜ Using the caliper
Loosen the locking screw
clockwise.
Push the external measuring jaws
internal measuring jaws
Switch the LCD display
ON / OFF key
12
GB/IE/NI
with screwdriver (not
13 ]
[
with screwdriver (not
13 ]
[
[
4 ]
with a dry cloth. Otherwise,
6 ]
[
[
4 ]
[
2 ]
on by pressing the
[
5 ]
.
10 ]
[
so that you can
and the depth-
1 ]
[
by turning it anti-
and the
11 ]
[
together.
[
5 ]
[
8 ]
8 ]
[
work
5 ]
[
Publicité
