SilverCrest SLSN 3 D3 Mode D'emploi page 19

The shaver head (6) must be replaced if...
•
you see any damage
•
you notice slight pulling when shaving or the shave is not as thorough as
usual
•
it has become worn through use, usually after a year at the latest
The shaver head (6) is subject to wear and is not covered by the
guarantee.
A new shaver head (6) can be ordered online from the following
website:
shop.targa.de
9.2.1 Changing the shaver head
•
To unlock the shaver head, press both
unlock buttons (5) at the same time;
these are located on the side of the
shaver head.
•
Keep the unlock buttons (5) pressed
and lift the shaver head upwards to
remove.
•
Now attach the new shaver head onto
the top of the lady shaver with the
trimmer locking mechanism (4) facing
the front.
•
Press the shaver head downwards
evenly until you hear it click into place.
9.3 Storing the device when not in use
If the lady shaver is not going to be used for a long period of time...
•
clean it as described in section '9. Cleaning/maintenance'.
•
Remove the batteries (13) from the battery compartment.
•
Keep it in a cool, dry, clean place.
We recommend using the storage bag (16) when storing the
device.
SilverCrest SLSN 3 D3
English – 17