Publicité
Les langues disponibles
Les langues disponibles
SilverCrest SLSN 3 D3
9. Cleaning/maintenance
9.1 Cleaning
•
Remove the protective cover (1) or attachment (10, 11, 12), if fitted. The
protective cover (1) and attachments (10, 11, 12) can be cleaned using
soapy water. Then dry it well.
•
The housing of the lady shaver can be wiped using a slightly damp
cloth; never use any aggressive cleaning agents.
•
Remove any remaining hair from the shaver head (6) using the cleaning
brush (14).
•
For a more intensive clean, you can remove the shaver head (6) from
the lady shaver. Using your thumb and forefinger, press the unlock
buttons (5) on both sides of the shaver head (6), pulling it upwards to
remove.
•
The head part of the lady shaver and the removed shaver head (6) can
be rinsed off under running water. Then dry the parts thoroughly. Do so
carefully to prevent damaging the shaving foil (2).
•
Then place the shaver head (6) back on in reverse; the trimmer locking
mechanism (4) must be positioned above the ON/OFF switch (7) when
doing so. Slide the shaver head (6) downwards until you hear it click
into place.
After cleaning, add a few drops of blade oil (15) to the trimmer (3)
and the shaving foil (2) every so often. Leave the lady shaver
running for a few seconds without using it to allow the blade oil (15)
to spread out evenly. Then, wipe off any excess blade oil (15) with
a soft cloth.
9.2 Maintenance
The shaver head (6) of the lady shaver is subject to constant wear resulting
from use.
DANGER! Stop using the lady shaver if you notice that the shaver
head (6) and/or shaving foil (2) has become damaged. Risk of
injury!
16 – English
Publicité
