Publicité
Les langues disponibles
Les langues disponibles
Installazione
If two coolers are to be
installed side by side, there
should be at least 4 cm
distance between them.
•
Our company shall not be liable for any
damages that will arise when the
product is used without grounding and
electrical connection in accordance with
the national regulations.
•
Power cable plug must be within easy
reach after installation.
•
Do not extension cords or cordless
multiple outlets between your product
and the wall outlet.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant pipes
to improve the cooling system.
Refrigerant with high
temperatures may flow through
these areas, resulting in hot
surfaces on the side walls. This
is normal and does not need any
servicing. Please pay attention
while touching these areas.
Refrigerator / User manual
4.4. Attaching the plastic wedges
Use the plastic wedges in the provided with
the product to provide sufficient space for
air circulation between the product and the
wall.
1. To attach the wedges, remove the
screws on the product and use the
screws provided with the wedges.
2. Attach 2 plastic wedges on the
ventilation cover as shown in the figure.
11 / 21 EN
Publicité
