Publicité
EN
Checking the backpressure
sensor
1
Loosen the control unit and fold it forwards.
2
Short-circuit both of the backpressure
sensor's metal brackets on the rear of the
control unit with an electrically conductive
object.
✓ If the backpressure sensor is working,
the status LED lights up red, the buzzer
sounds and the fault is displayed in the
Geberit Control app.
3
Check the metal brackets for scaling. Clean
with a soft cloth and descaling agent if
required.
20
ATTENTION
Surface damage caused by scratching
Risk of corrosion if the gold-plated surface of the
metal brackets is damaged.
▶ Do not clean the metal brackets with abrasive
or scratching tools.
4
Snap the control unit into place.
18014409509155339 © 04-2024
971.559.00.0(02)
Publicité
