Publicité
Replacing the control unit
Before removing the control unit, read out
the flushing parameters using the Geberit
Control app.
1
Demount the control unit. → See
page 105.
2
Mount the new control unit (art. no.
245.598.00.1 or 245.599.00.1) and check
that the solenoid valves function correctly.
→ See
4
, page 108.
Put the Geberit HS30 and HS50 hygiene flush units
in the concealed cistern into operation:
3
Open the Geberit Control app.
4
Select the corresponding hygiene flush unit
under [New end devices].
5
Establish a connection with the hygiene
flush unit.
6
Set password.
7
Configure the solenoid valves.
8
Adjust the [device settings].
9
Enter flushing programmes under
[Flush settings].
10
Under [Information], create the
[commissioning report] and forward it to the
operator.
18014409509155339 © 04-2024
971.559.00.0(02)
Replacing the solenoid valves
1
Demount the control unit. → See
page 105.
2
Demount the solenoid valves. → See
1
,
page 106.
3
Mount new solenoid valves (art. no.
244.943.00.1 or 244.944.00.1). → See
page 107.
4
Mount the control unit and check that the
solenoid valves function correctly. → See
4
, page 108.
EN
1
,
2
,
3
,
23
Publicité
