Type Overview/Material Details; Safety - ProMinent CONCEPT PLUS Mode D'emploi

Type overview/material details / Safety
2
Order No. CONCEPT
Pump type
1000
1601
1002
0704
Order No. CONCEPT
Pump type
1000
1601
1002
0704
* Seal material
** Valve body material is PVC
The valve balls are made of ceramics.
3
Correct use of • The pump may be used only for metering liquid media!
equipment • All other uses or modifications are prohibited!
• The pump is not suitable for metering gaseous media or solids!
• The pump must be operated by appropriately trained and authorised
WARNING
• The pump may start to operate as soon as it connected to the mains
• The pump cannot be switched off! In the case of an electrical failure,
• Disconnect the power cable from the mains before working on
18

Type overview/material details

Safety

personnel!
The personnel must be familiar with metering pumps and their operation!
power supply!
Ensure that no hazardous metering chemical can leak out!
If you have not done so, set the multifunction switch to STOP or
disconnect the pump from the mains immediately.
disconnect the mains cable from the power supply.
the pump.
PLUS
, CNPa, 115 V versions
liquid end material
PP (with EPDM*)
1022480
1022481
1022482
1022483
PLUS , CNPa, 230 V versions
liquid end material
PP (with EPDM*)
1022452
1022453
1022474
1022475
NP** (with Viton ® *)
1022484
1022485
1022486
1022487
NP** (with Viton ® *)
1022476
1022477
1022478
1022479
ProMinent ®