Publicité
Les langues disponibles
Les langues disponibles
electrical information
EN
5.7
light & blower assembly wiring diagrams
note:
This appliance is equipped with heat activated blower and lights.
The blower and lights automatically come on approximately 10 minutes after the main burner has been turned
on and remain on approximately 10 minutes after it has been turned off.
There is still the option of turning both on manually from the control panel located behind the safety screen.
note:
For the lights: the switch on the control panel must remain in the ON position.
For the blower: the wire harness provided with the kit must be used.
48
W415-4150 / A-0 / 05.23.24
LIGHTS
W405-0097
EMBER BED LIGHTS
EMBER BED LIGHTS
W405-0097
W405-0097
POWER CORD
W750-0159
POWER CORD
W750-0159
EMBER BED WIRE
W750-0531
PIGGY BACK
CONNECTORS
(FOR OPTIONAL
WALL SWITCH)
SWITCH
W660-0009
BLOWER
W062-0077
THERMODISC
W690-0002
VARIABLE SPEED
SWITCH
W660-0019
LIGHTS
W405-0097
WIRE HARNESS
W750-0500
2 WAY EMBER
BED WIRE
W750-0530
THERMAL DISC
W690-0019
WALL SWITCH
(LIGHTS)
OPTIONAL
SWITCH
W660-0009
WIRE HARNESS
W750-0050
Publicité
