MINIMUM REAR VENT CLEARANCES
WARNING
!
•
Universal Heat Management kit not available for rear vent installation.
For rear vent termination not exceeding 10" (254mm) of horizontal vent run.
Ceiling
REAR EXIT ENCLOSURE
The appliance requires a minimum enclosure height of 44" (111.8cm). For temperature requirements, the
enclosure space around and above the appliance must be left unobstructed.
NOTE: The vent shield is telescopic and must be adjusted to shield the full depth of the combustible
wall penetration.
* See "venting" section.
Enclosure
rough framing
24"
(61cm)
W415-4150 / A-0 / 05.23.24
EN
Plafo
31