Continental Fireplaces CBX36 Manuel D'installation page 30

rough framing
EN
3.2 minimum enclosure clearances
TOP VENT
CEILING
TOP EXIT ENCLOSURE
The appliance requires a minimum enclosure height of 50 1/2" (128.3cm). For temperature requirements, the
enclosure space around and above the appliance must be left unobstructed.
NOTE: The vent shield is telescopic and must be adjusted to shield the full depth of the combustible
wall penetration.
* See "minimum framing dimensions" section for details on reducing vent pipe top clearances.
These parameters also apply to all illustrations in this section.
30
W415-4150 / A-0 / 05.23.24
ENCLOSURE
PLAFOND