hajdu HB300C Manuel De Mise En Service, D'opération Et D'entretien page 78

_________________________________ ___EN__________________________________30
program flashes slowly, and the command set by the timer displays*** If you
have set the start time, the last temperature value set will display. If you have
set the switch off time, the '
 Press and hold down the 'CANCEL' button for 3 seconds, or do not press any
button for half a minute to quit the checking menu.
Remark:
If there is a conflict between the timer and the manual start:
Manual start will always override timed stopping.
2.
Deleting an error code
 Simultaneously press the 'ENTER' and 'CLOCK' buttons. This will delete all
error codes displayed on screen.
 The appliance will sound an audible signal.
' text will display.