Télécharger Imprimer la page

SilverCrest SPWE 180 A2 Mode D'emploi Et Consignes De Sécurité page 12

Masquer les pouces Voir aussi pour SPWE 180 A2:

Publicité

Les langues disponibles

Les langues disponibles

SilverCrest SPWE 180 A2
8.2 "Lo" is indicated on the LCD display and the scales switch off
The CR2032 lithium battery is almost empty. Replace the CR2032 lithium battery with another
of the same type. Please note the instructions in the "Replacing the battery" section.
8.3 "Err" displayed on LCD screen
Your weight cannot be measured as you are not standing still on the tread. Try to keep as still
as possible when weighing yourself.
8.4 "O-Ld" displayed on LCD screen
The weight exceeds the maximum load of 180 kg / 396 lb (28 stone 4). Step off the tread (2)
of the bathroom scales immediately to avoid damaging them.
9. Maintenance/cleaning
Repairs are required if the bathroom scales have been damaged in any way, for example if the
device housing is damaged, when liquids or objects have penetrated into the bathroom scales or
when the product has been exposed to rain or moisture. Repairs are also necessary if the product
does not perform normally or if it has been dropped. If smoke, unusual noises or smells are noticed,
remove the battery from the bathroom scales immediately. If this occurs, the bathroom scales should
not be used before they have been inspected by authorised service personnel. All servicing work
must be carried out by qualified specialist personnel. Never open the housing of the bathroom scales.
Only use a clean, dry cloth for cleaning the device. Never use any corrosive liquids.
10 - English

Publicité

loading

Ce manuel est également adapté pour:

425947 2301