Publicité
Les langues disponibles
Les langues disponibles
7.2 Auto power off
The bathroom scales have an automatic switch-off function (Auto Power Off function).
•
The bathroom scales switch off automatically approx. 15 seconds after stepping off the tread
(2).
•
The bathroom scales will also switch off automatically approx. 15 seconds after the weight
measurement if you don't step off the scales surface (2).
7.3 Replacing the battery
Replace the battery when it is empty. To replace the lithium battery
CR2032, remove the cover of the battery compartment (4) at the rear
of the bathroom scales by inserting a finger into the recess on the side
of the battery compartment (4). Then lift the battery compartment (4)
cover upwards and remove it.
To remove the battery, push it down a bit (see the direction of the arrow
in the illustration). You can then remove the battery from the holder.
Then insert a new CR2032 lithium battery. Always pay attention to the
polarity. This is indicated in the battery compartment (4), and the Plus
symbol on the lithium battery CR2032 must be visible, as shown in the
adjoining illustration.
Next insert the battery compartment (4) cover back to its original
position. The bathroom scales are now ready to use.
8. Troubleshooting
8.1 Nothing is indicated on the LCD display
•
The CR2032 lithium battery is empty. Replace the CR2032 lithium battery with another of the
same type. Please note the instructions in the "Replacing the battery" section.
•
The CR2032 lithium battery is inserted incorrectly. Please note the instructions in the "Replacing
the battery" section.
SilverCrest SPWE 180 A2
English - 9
Publicité
