Dehumidifying Cycle Of Pump Oil; Periods Of Inactivity; Malfunctioning - Fulgor Milano FVCD 270 Mode D'emploi Et D'entretien

Instructions for Use

DEHUMIDIFYING CYClE OF PUMP OIl

The core of the machine is the vacuum pump.
Carry out the following instructions to preserve the inside surfaces of the pump from oxidation, which
blocks the rotor due to oxidized residue, which occurs when the watery vapour, sucked in together
with air, condenses and remains inside the pump body for a long time:
1) Always pack the product while it is cold, possibly at 3-4°C. The hotter the product is, the less it
lasts and the more condensation is formed inside the pump, thereby oxidizing and damaging it.
2) If the device is used only every now and then, before packing the products, carry out at least 2
or 3 complete "vacuum in the vessels" long cycles with the vacuum chamber. This allows the
temperature of the pump oil to be brought to a steady level and to evacuate the watery vapour.
3) We recommend carrying out the dehumidifying cycle of the pump oil regularly, pressing
the key for 5 seconds.

PERIODS OF INACTIVITY

• If the appliance is to remain at a standstill for a long period of time, clean the inside and outside
thoroughly and protect the external surfaces with specific oil-based products for stainless steel.
ATTenTIon! Disconnect the plug until further use.
ATTenTIon! Before new use, control the integrity of the appliance and clean FVCD
270 thoroughly
• When re-starting, carry out an automatic dehumidifying cycle of the pump oil pressing the
key for 5 seconds.
• The cycle lasts 20 minutes. At the end, the machine will be in stand-by.

MAlFUNCTIONING

ATTenTIon! In the case of malfunctioning, before calling the Dealer to request after-
sales assistance, check the perfect insertion of the power supply cable and make sure
electric current is present.
• Moreover, check that the lid gasket is well inserted and that the sealing bar is correctly engaged
on the two pins.
• If, after having carried out the controls suggested, FVCD 270 still does not work, disconnect the
appliance from the mains and call the Dealer or authorised after-sales centre, communicating the
machine serial number.
ATTenTIon! Do not try to repair or modify any part of the appliance: as well as making
the warrant null and void, it can be potentially dangerous. Entrust specialised tech-
nicians only.
FVCD 270
63