Vacuum Cycle For Jars - Brief - Fulgor Milano FVCD 270 Mode D'emploi Et D'entretien

Instructions for Use
The cycle can be interrupted in advance by pressing the
appliance does not carry out sealing and the chamber is decompressed.
To exit the energy-saving state, press any key.

VACUUM CYClE FOR JARS - BRIEF

Request the most suitable vacuum containers from your regular dealer.
Once the container is inserted inside the vacuum chamber as described in the "Preparation" chapter,
close the lid exerting a slight pressure on the front and at the same time select the
An acoustic signal (short beep) is emitted on cycle start.
The cycle proceeds automatically in the following order:
The evacuation phase is signalled by the luminous indicator
• During the successive unload phase, all of the luminous indicators go back to initial switch-on
situation.
• An acoustic signal (short beep) is emitted at the end of the cycle, indicating that the machine
is ready for a new cycle. The chamber is decompressed, allowing the container to be extracted.
The cycle can be interrupted in advance by pressing the
FVCD 270
key. In this case, the
key flashing.
key.
key.
55