No-Load Cycle For Trays With Container Outside Of The Chamber; Interruption Of The Cycle In Progress - Fulgor Milano FVCD 270 Mode D'emploi Et D'entretien

FVCD 270
Instructions for Use

NO-lOAD CYClE FOR TRAYS WITH CONTAINER OUTSIDE OF THE CHAMBER

Request the most suitable vacuum containers and suction device from your regular dealer.
If you work with containers that exceed the capacity of the vacuum chamber, the suction device is
obtainable upon request.
Activate the tray cycle suitable for the type of container (short for plastic containers, long for high
resistance professional containers) and press the suction device from the suction inlet side (at the
top right of the vacuum chamber), and from the container side.

INTERRUPTION OF THE CYClE IN PROGRESS

By pressing the key, an acoustic signal warns that the cycle is interrupted immediately.
The bag is not sealed and the tank is decompressed.
After the unload phase the luminous indicators go back to the initial switch-on phase.
58