Fulgor Milano FVCD 270 Mode D'emploi Et D'entretien page 57

Instructions for Use
The cycle proceeds automatically in the following order:
The evacuation phase is signalled by the luminous indicator
• During the successive unload phase, all of the luminous indicators go back to initial switch-on
situation.
• An acoustic signal (short beep) is emitted at the end of the cycle, indicating that the machine is
ready for a new cycle. The chamber is decompressed, allowing the container to be extracted.
The cycle can be interrupted in advance by pressing the
Close the container suction valve immediately so that air cannot enter the container.
The vacuum obtained with this cycle is equal to 100% of the vacuum that can be
reached with FVCD 270 and is consequently only indicated for very strong contai-
ners realised in thick plastic, in glass or in steel.
FVCD 270
key flashing.
key.
57