Cleaning The Sealing Bar - Fulgor Milano FVCD 270 Mode D'emploi Et D'entretien

ClEANING THE SEAlING BAR

ATTenTIon!
Remove the electric power supply before intervening for maintenance.
• It is recommended to clean the sealing bar every month in a way to remove any residues that could
cause deterioration of the bag sealing quality.
• To make the operation easier, lift the sealing bar upwards (A), extracting it from the two pins (B).
• The use of a soft cloth or non-abrasive sponge and a neutral detergent or alcohol-based disinfec-
tant is recommended.
• Finally, engage the bar on the two pins (B) centring the two holes on the lower part of the bar and
check correct engagement.
ATTenTIon!
Do not remove the black Teflon strip! Do not use scrapers or abrasive tools!
A
62
B
Instructions for Use
FVCD 270