Fulgor Milano FVCD 270 Mode D'emploi Et D'entretien page 53

Instructions for Use
The cycle proceeds automatically in the following order:
The evacuation phase is signalled by the
The sealing phase is signalled by the
During the successive unload phase, all of the luminous indicators go back to initial switch-on situation.
• When the vacuum chamber is decompressed, it is possible to open the lid and extract the sealed
bag (at the end of the unload phase).
• In the case of the preservation vacuum cycle, the product is tightly wrapped and compressed by
the bag.
• A n acoustic signal (short beep) is emitted at the end of the cycle, indicating that the machine is
ready for a new cycle.
By pressing the
the sealing phase in advance.
The cycle can be interrupted in advance by pressing the
appliance does not carry out sealing and the chamber is decompressed.
To exit the energy-saving state, press any key.
FVCD 270
key during the air evacuation phase, the appliance passes to
key flashing.
luminous indicator key on.
key. In this case, the
53