Publicité
Les langues disponibles
Les langues disponibles
English – 16
How it works
In combination with the <eBike Lock>, the smart-
phone and the on-board computer work like a key for
the drive unit. The <eBike Lock> is activated by
switching off the eBike. When switching on, the eBike
checks if any pre-set key is available. This is indicated
by a padlock symbol on the Purion 200 operating
unit.
Note: The <eBike Lock> alone does not provide ade-
quate theft protection; it is simply a supplement to a
mechanical lock. The <eBike Lock> does not provide
any form of mechanical lock for the eBike. Only the
assistance from the drive unit is deactivated. The
drive unit will be unlocked for as long as the smart-
phone is connected to the eBike via Bluetooth® or the
on-board computer is placed in the holder.
If you want to give third parties temporary or per-
manent access to your eBike, share one of the pre-
set digital keys (on-board computer/smartphone).
As a result, the <eBike Lock> is still active. If you
want to take your eBike to a service, the <eBike
Lock> can be deactivated in the eBike Flow app in
the menu item <Settings>. If you wish to sell your
eBike, you will also need to delete the eBike from
your user account in the eBike Flow app in the <Set-
tings> menu item.
When the eBike is switched off, the drive unit will
emit a "Lock" sound (i.e. an audio signal that is played
once) to indicate that the assistance from the drive
unit is switched off.
When the eBike is switched on, the drive unit will emit
two "Unlock" sounds (i.e. an audio signal that is
played twice) to indicate that the assistance from the
drive unit is enabled again.
The "Lock" sound will help you determine whether or
not the <eBike Lock> on your eBike is active. The au-
dio signal is activated by default, but it can be deacti-
vated in the eBike Flow app in the <Locking
sound> menu item by selecting the lock symbol un-
der your eBike.
0 275 U07 3RP | (03.05.2024)
Note: If you can no longer set up or switch off
the <eBike Lock>, please contact your bicycle
dealer.
Replacing eBike components and <eBike Lock>
Replacing the smartphone
1. Install the eBike Flow app on the new smart-
phone.
2. Log in using the same account with which you acti-
vated <eBike Lock>.
3. <eBike Lock> is displayed as set up in the eBike
Flow app.
More information about this can be found in
the eBike Flow app or in the Bosch eBike Help Center
on the website www.bosch-ebike.com/help-center.
Software updates
Software updates must be started manually in the
eBike Flow app.
Software updates are transferred from the app to the
control unit in the background as soon as it is con-
nected to the app. During the software update, keep
watching the display on the control unit Purion 200.
The eBike is then restarted.
You can control the software updates via the eBike
Flow app.
Bosch eBike Systems
Publicité
